{TOP 7} Best SIG P938 Holster Review {2023 UPDATED}

More people are ready for everyday gun carry. There has been an explosion of CCW licenses. Consequently, many compact pistol and revolver models capture a large share of the handgun market.

Best SIG P938 Holster

One of these popular models is a SIG Sauer P938. It is a micro-compact pistol chambered in 9mm Luger. The 9mm Luger is a full-sized cartridge that offers plenty of stopping power.

Resembling legendary Colt 1911, the SIG Sauer P938 has an overall length of 5.9-inches. It weighs just 16 ounces. Therefore, it is optimized for concealed carry.

It was introduced to the market in 2011. This very compact 9mm gun employs the single-action mechanics typically found on a 1911 weapon . Besides that, with a width of 1.1 inches, the SIG P938 sports a much thinner profile. Its magazine is just a single stack.

It is a much smaller firearm than a double-stack sub-compact pistol. The SIG P938 , therefore, is an excellent gun for people who want a slim, compact, and light pistol for CCW carry.

What to Look For in SIG P938 Holsters 

IWB Holster 

The SIG P938 is not bulky or massive. Manufacturers of SIG P938 designed it for users who want incredibly compact and skin concealed carry firearms. And because the SIG P938 is a small pistol, it tends to fit in numerous holsters. The most common holster type for this firearm is IWB (Inside the Waistband). Another holster style that users lean towards is the OWB holster (Outside the Waistband) 

However, when it comes to convenience, security, and concealment, IWB is the ideal option. Many manufacturers of the SIG P938 holsters design these holsters while focusing on IWB carry. Another common way to carry the SIG P938 is pocket carry. It’s not everyone that has front pockets but enough to conceal a SIG P938. However, they can solve this problem by having a wallet holster in their back pockets. So, the SIG P938 also works well for pocket carry. 


Another factor to look out for is durability. It’s always vital to buy a holster that will last long despite regular usage. Some people who buy a holster make use of it every day. So, it’s not a wise investment to choose style or design over longevity. Ensure the holster model you choose can live up to the demands of regular usage. One way to know if the SIG P938 holster you want to choose is durable is by checking the reviews. Always check out reviews before committing to any holster. 

Holster Styles

The success of the P938 led many manufacturers to release a vast number of carrying platforms. These come in about every category of holsters.

Regardless of how you are dressed, you can find a holster for the P938. It can be worn in many ways and concealed just about anywhere. The many holsters perfectly complete your personal defense plan.

There are many holster styles to choose from. These include IWB – inside-the-waistband holsters and OWB – outside-the-waistband holsters . However, you also have the choice of pocket holsters and ankle holsters or holsters designed for more discreet places on women’s bodies.

Typically, a CCW owner goes for the inside the waistband (IWB) or outside the waistband (OWB) holster style. Still, the tiny SIG P938 would be an excellent choice if you prefer pocket or ankle carry.

Holster Material

The dominating material for the P938 holster is Kydex. It is inexpensive, low profile, and maintenance-free. It will also keep its shape over a long period.

Traditional holster material is leather. Leather is well-known for being durable and comfortable while providing a timeless and classic look.

Less popular, but also very practical and affordable, are synthetics. These holsters are made of nylon, textile, or similar flimsy material. They tend to sag and disintegrate quickly.

Since comfort is a keyword these days, holster manufacturers have made that feature a priority. Often two or more materials are combined to offer a greater comfort level, more durability, and quick draw speed.

These so-called “Hybrid” holsters usually use leather for backing and a Kydex shell. The shell is molded specifically for each gun model. By definition, hybrid holsters are somewhat bulkier than plain Kydex holsters . But they offer incomparably greater comfort.

Holster Retention

Though significantly smaller than a full 1911, you still need some kind of retention on your P938 holster. This feature ensures the pistol does not fall out of the holster. It also prevents someone from grabbing the SIG out of your holster,

Depending on the type, you can find holsters with passive or active retention. Passive retention is based on the use of friction. Active retention employs straps, buttons, or thumb-operated levers. These hold the gun in position. They need to be released before drawing. Currently, three retention levels range from simple Level I to sophisticated Level III.

If you are concerned about holster grabs, you will need higher-level retention.

{TOP 7} Best SIG P938 Holster Review {2023 UPDATED}

1. Desantis Mini Scabbard Holster for SIG P938

DeSantis makes quite a few IWB and OWB rigs. For OWB carry style, they offer a variety of leather and synthetic holsters.

The Mini Scabbard retains minimalistic features of the Yaqui Slide. It is an often-copied design covering the trigger guard and little else.

This rig has a minimalist design. It is worn on the belt and outside of the waistband,. It is also primarily intended for concealed carry.

A simple open-top design, the Mini Scabbard is a traditional-looking holster. It is made of very thin leather. The slimness of the leather means that break-in time will be short. Furthermore, the minimum amount of material allows a close, snug fit. It will hug the body exceptionally well for an OWB (Outside the Waistband) holster.

This very nice leather, no-frills holster from DeSantis. It is perfectly molded to fit the pistol. It also doesn’t feature any clips or loops to attach to your belt. Instead, it uses a “belt tunnel” that holds the holster more firmly to your body.

This outside-the-belt holster comes with a high-ride, forward pitch. There is also an adjustable retention screw under the gun’s grip.


  • This gun holster is relatively affordable 
  • It is incredibly convenient to use 
  • It was built specifically for the SIG P938


  • The leather material used is not quality enough

2. WeThePeopleHolsters SIG SAUER P938 MICRO 9MM/22LR IWB HOLSTER

With a subcompact pistol like the Sig Sauer P938 Micro, you want a low-profile holster like the We The People IWB Holster.

It’s made of slim, hand-molded Kydex, just .08 inches thick, for durability and a slender profile. The holster weighs just over 2 ounces.

As for features, this holster has an eight-position adjustable belt clip that allows you to adjust the holster’s ride height and cant so you can choose just the right carry position for your needs. The clip securely fits on 1.5-inch belts and won’t come off when you go to draw your Sig.

The retention level is also adjustable and provides an audible click so you know when your gun is securely holstered.

There’s also a protective sweat guard which protects your skin from rubbing against the metal slide of your Sig Sauer P938 and protects your P938 from sweat from your body.

The holster comes in right and left-handed versions, as well as a wide variety of patterns and colors to suit any taste.

If you carry your Sig Sauer P938 Micro with a Streamlight TLR-6 Light/Laser, there’s also a version that’s compatible with that particular accessory.

And speaking of accessories, We The People also sells a holster claw to help with concealability.

Finally, this holster is made in the US and comes with a lifetime guarantee.


  • Made with top quality materials 
  • Lifetime warranty 
  • This holster is fully adjustable 
  • Incredibly easy to re-holster


  • Can be molded better 

3. Tulster Profile Holster IWB

The small single stack SIG P938 is designed for situations when you need deep concealment.

A Tulster Profile ultra-concealable, minimalistic inside the waistband holster is the perfect solution. The Tulster Profile is high-quality. It is also a narrow IWB holster designed for appendix carry .

The Tulster Profile Holster is engineered from .08″ thick Kydex. it comes with smooth edges and solid retention.

You can adjust retention using a Phillips-head screwdriver. The screw is located right below the trigger guard.

The trigger guard is covered. There is an undercut to offer a higher grip on your P938. It has a full sweat shield to aid in re-holstering.

Despite a very minimalist design, this good-quality basic holster also allows you to adjust cant. You just loosen two screws. The two stainless steel screws actually hold a plastic injected molded clip from approximately 0-15 degrees.

Instead of a plastic belt clip, you can choose a soft belt loop. Additionally, you can purchase additional products that supplement the Profile line. These include the Echo Mag Carrier and a Sidekick claw.


  • Fits perfectly 
  • Made with quality materials 
  • Lightweight and smooth design 
  • It holds retention well 
  • Incredibly comfortable 


  • The edge of the belt chip is rounded. So, it didn’t stay fastened on the belt 


One of the best IWB options for first-time buyers or people on a budget is Concealment Express Kydex holsters.

This affordable and effective option is designed to be worn comfortably at 3:30 – 4 o’clock inside the waistband. You will also need to wear an untucked shirt.

In fact, this holster is best suited for an appendix inside the waistband (AIWB) carry. That is especially true when you upgrade it with the Concealment Express Claw Kit.

The purpose of the Concealment Express supplement is to lower potential printing. It pushes the butt of your weapon closer to your body.

It has a minimalist design. But, this simple kydex holster also offers an adjustable ride height. The cant (or carry angle) ranges from -5 to +20 Degrees.

As a nice touch, the retention pressure is fully adjustable. When you shoved your SIG 938 into the Kydex, you’ll hear a satisfying “Click.”

This extremely lightweight but durable Inside The Waistband rig is made of .080″ Kydex or Boltaron. The entire holster weighs just 2.5 oz.

The holster design is completed with a standard 1.5″ belt clip made of fiber-reinforced ABS plastic.

Additionally, the Concealment Express holster features a full-length Sweat Guard, an undercut, and a fully covered trigger guard. There is also an over-cut open-face to accommodate threaded barrels.

The updated versions are tuckable. The brand also offers an OWB option. That makes this holster extremely versatile.


  • It comes with a clip-retention feature that provides accurate clipping
  • This gun holster has a full length sweat guard that guards the firearm from sweats 
  • Its threaded barrels ensure this holster is sturdy. 


  • It can be a bit complex to remove from the holster 

5. Talon Concealed Carry Wallet

Concealed Carry Wallet and Cargo pocket holster by Talon is designed to be placed in a back pocket.

The Talon was designed by law enforcement professionals. This popular holster type isn’t for everyone. You will need time and practice to get used to a holster like this.

The Talon Wallet Holster is constructed from all-premium cowhide leather. It is made in the United States. It also has a metal band to provide a good grip and increase durability.

Talon Concealed Carry Wallet holster is custom molded to fit specific pistols. The subcompact SIG Sauer P938 model will fit most rear pant pockets or side cargo pant pockets.

The Talon Wallet Holster comes with a thick leather anti-print panel. It completely disguises the shape of the firearm. Instead, it just looks like a regular, old wallet.

This full concealment holster should be worn with the panel facing away from the body. That allows you to access the trigger guard with your palm.

Like most leather products, this concealed carry wallet holster requires break-in period.


  • This gun holster is made using quality leather 
  • Very comfortable 
  • Can easily hide the gun
  • Manufactured by law enforcement professionals 


  • The stitching of this leather holster is not sturdy

6. UTG Concealed Ankle Holster

Another deep-concealment and comfortable model is the Leapers UTG. Leapers is a trusted name in shooting sports and tactical gear.

As its name suggests, the UTG Concealed Ankle Holster is purpose-built for wearing on your ankle. This UTG Leapers product is ambidextrous. You can wear this ankle holster on either leg. You can also put it outside or inside your leg.

The UTG Concealed Ankle holster is made of heavy-duty elastic. It provides a perfect fit for small automatic pistols. That includes the SIG P938. This carrying rig is a two-piece system designed to cover the trigger guard and prevent accidental discharges.

There is a nylon holster constructed with padding. Then there are padded wraparound straps with a hook and loop as a secured lock feature.

The upper and lower half are connected with double vertical security straps. They keep the holster and pistol from bouncing or slipping.

This UTG ankle holster is very supportive. It also features a simple Velcro retention device to hold the pistol no matter the situation.

This concealed carry holster is surprisingly well built with a price around $15.

The UTG Concealed Ankle Holster will accommodate your SIG P938 with laser or aftermarket sights quite well.


  • The velcro strap it comes with ensures your firearm is securely held 
  • Ideal for ankle carry


  • Doesn’t have padding on the ankle. This makes it uncomfortable to wear for an extended time 

7. Crossbreed Holsters MiniTuck IWB Concealed Carry Holster

As you probably assume, hybrid holsters are more comfortable than Kydex to wear.

Crossbreed Holsters has used its hybrid materials to make one of the most successful IWB designs. They call it the SuperTuck. The SuperTuck has a smaller version, the MiniTuck.

Like its big brother, the Crossbreed’s MiniTuck combines a premium leather backer with molded Kydex retention pocket.

As for the backing material, you can choose between cowhide and horsehide. Horsehid is softer than cowhide. The Kydex pouch is a hand-molded shell black-riveted to a leather backing.

A custom hand-molded Kydex shell is crafted to fit each specific sidearm. Each holster will have proper retention and allow for easy re-holstering.

The CrossBreed MiniTuck IWB holster is held in place by two screw-mounted SnapLok steel clips. These powder-coated clips are tuckable and modular. They enable you to adjust the cant and ride height.

The MiniTuck features a slim profile for easy concealment. It also has the extra-tall channel to allow for oversized sights.


  • Thick leather 
  • Smooth and strong 
  • Very solid construction 
  • The gun’s retention is ideal 
  • One of the best leather holsters for SIG P938 


  • This leather holster has a plain design 
  • Digs into the middle finger 


Considering its size and slim profile, the P938 is very concealable. It would make an excellent handgun for 1911 fans looking to carry every day. Most of these holsters would cleverly eliminate printing. They all allow you to conceal your Sig Sauer P938 perfectly.

Overall, the type of SIG P938 holster you choose should depend on your experience and personal preference. If you want a gun holster that will make you comfortable, you’d have to spend a little more. However, do not worry. We have painstakingly gathered some of the best SIG P938 holsters in the market for you. You can’t go wrong with the holsters listed in this article. 

Leave a Comment